馬牌鋼絲纏繞膠管結構和規格（英文版）說明

Product Structure

Product Structure: consists of an inner tube, middle rubber layer, two, four or six spiral wire reinforcements and 

cover. Inner tube is to transmit liquid under pressure and protect steel wire against corrosion while cover is 

to protect wire against damage. Wire layer (ф0.3-2.0 reinforcement) is the structure materials that providing 

reinforcement. 

Application

Application: high pressure wire reinforcement Hydraulic hose mainly used in mine hydraulic support, oil exploration, 

suitable to engineer construction, crane transport, forging metallurgy, mining equipment, ships, injection molding 

machinery, agricultural machinery, various machine tools and carry hydraulic fluids, including petroleum base fluids 

which under specific pressure and temperature (e.g. mineral oil, soluble oil, mineral oils, fuels, lubrication), water 

based fluids (e.g. emulsion, oil-water emulsion, water), air and fluids, in industry department mechanization and 

automatic hydraulic systems. Its highest operating pressure could attain 70-120 Mpa. 

Note: ContiTech spiral hose specification refer to GB/T10544-03 Standard, DIN2003, EN856, SAEJ517

Working Temperature: -50℃ to 121℃

Product Specification Range: 6.3mm to 75mm. 

Types: 

4SP—Four wire spiral middle pressure hose

4SH—Four wire spiral high pressure hose

R12—Four wire spiral high temperature and middle pressure hose in abused condition

R13—Multiple wire spiral high temperature and high pressure hose in abused condition

R15—Multiple wire spiral high pressure high temperature and super high pressure hose in abused condition

CP3S—21Mpa constant pressure four layer wire spiral hose

CP4S—28Mpa constant pressure four layer wire spiral hose 

CP5S—35Mpa constant pressure four layer wire spiral hose

CP6S—42Mpa constant pressure four layer wire spiral hose